Brilliance Industrial cleaner (non-foaming) 20 liters

Brilliance Industrial cleaner (non-foaming) 20 liters

Brilliance® Industrial Cleaner (non-foaming), made with low-foaming surfactants, also contains an anti-corrosion component. It can be used in high-pressure compressors and other devices, in areas where high oil and grease dissolution is essential. Effective on sooty, burnt surfaces in the baking industry, meat industry, catering industry, etc. It can also be used with cold water, with minimal exposure time (only 5–10 minutes even for the most contaminated surfaces). Can only be used on alkaline and water-resistant surfaces!

Instructions for use

With a high-pressure device, for very stubborn dirt: For sooty, burnt surfaces in a 1:5–1:20 dilution, for cleaning floors in warehouses, garages, workshops, or for washing the chassis of vehicles: in a 1:20 dilution.

For lighter dirt: dilute 1:20-200.

Extraction (Extraction: chemical extraction) or scrubbing machine:

Any floor can be cleaned in a dilution of 1:100-200. Do not use more concentrated, as the surface may become sticky! If this should happen, Brilliance® Limescale Remover and Cleaner Super Concentrate will restore the surface to its original shine.

By hand, with a scrub brush: heavily soiled concrete or any other less demanding surface can be cleaned in a 1:5-10 dilution, down to -5⁰C. For synthetic resin, test to see if it will not harm the surface!

For very stubborn dirt (from a spray bottle): for engines, boilers, vehicles for bug removal, for heavily soiled kettles: in a dilution of 1:5-20. The cleaner must be rinsed off before it dries on the surface!

For lighter dirt (from a spray bottle): 1:30-100 dilution. The cleaner must be rinsed off before it dries on the surface !