Innofluid MF-T cleaning-disinfecting concentrate 5L

INNOFLUID MF T cleaning-disinfecting concentrate 5L
- general cleaning-disinfecting concentrate, braked foam preparation
- antimicrobial spectrum: bactericidal, fungicidal
- conditions of use: Always use the working solution fresh, before use must be prepared. Surface disinfection: prepare a 1% working solution, exposure time: min. 10 minutes, temperature: ambient. During the exposure time, the surface must be wet, and no untreated part should remain.
- Use in the food industry: hand washing 1% 10 minutes ambient temperature / machine washing, CIP systems 1% 5 minutes 50°C


Anti-foaming, disinfecting liquid for professional use concentrate (product type PT2, PT4). which cleans and disinfects in one phase. Can be used in the food industry, catering, healthcare, social areas, etc. for disinfecting cleaning in CIP systems for both manual and machine washing. During use, the freshly prepared cleaning-disinfectant working solution at the appropriate temperature must be prepared with a separate dilution and applied to the surface, or the dish, tool, etc. to be cleaned. put into the working solution. The efficiency of the cleaning can be increased by increasing the temperature and mechanical effect. After the period of effect has expired, the product residues must be removed by thoroughly rinsing with potable water (except for floors), the effectiveness of the rinsing must be checked for surfaces in direct contact with food. When using as intended, make sure that food does not come into contact with or become contaminated with the product, its residues or waste. Food and drink contaminated with the product cannot be used for human consumption. Do not mix with other cleaning and disinfecting agents!